Fareed Dawan
- Courses2
- Reviews6
- School: Southern University and A&M College
- Campus:
- Department: Engineering
- Email address: Join to see
- Phone: Join to see
-
Location:
801 Harding Blvd
Baton Rouge, LA - 70807 - Dates at Southern University and A&M College: March 2017 - June 2018
- Office Hours: Join to see
Biography
Southern University and A&M College - Engineering
Assistant Professor - Mechanical Engineering
Fareed
Dawan, Ph.D.
Baton Rouge, Louisiana Area
+ Assistant professor of mechanical engineering with extensive experience as a researcher, manager, and assistant director.
+ Expertise in microfabrication, nanofabrication, and the integration of polymer nanocomposites into MEMS for use in advanced photovoltaics.
+ Excellent communication skills evident through peer-reviewed publications in leading journals, national and international presentations and conference proceedings.
Experience
Louisiana State University
Research Associate
Research Associate 3 - Microlithography Process and Instrumentation Engineer (2007-2010)
I served two roles, (1) as a clean room manager, and (2) as a process engineer. As a manager I:
•Managed a class 100 clean room facility
•Provided micro-fabrication customer service and research projects to ensure that project timelines are met, deliverables are produced, and that projects stay within the budgetary and other guidelines
•Was immediately responsible for over 20 microfabrication processing equipment and for the procurement and installment of new equipment
•Instructed and trained faculty, staff, and over 40 students/year on lithography processes and equipment
•Conducted studies to improve equipment operation and expand on equipment/process capabilities
Some of my duties as a process engineer included:
•Provided microfabrication services including LIGA, UV and X-ray lithography, mask fabrication, thin film depositions and surface modification, along with metrology.
•Supported research in the area of nanolithography and enhanced etching procedures
Research Associate 2 (2006-2007)
•Provided microfabrication services including LIGA, UV and X-ray lithography, mask fabrication, thin film depositions and surface modification
•Supported research in the area of nanolithography and enhanced etching procedures
•Independently supervised two Research Experience for Undergraduate (REU) students with successful outcomes
•Worked flexible hours to meet customer demands and deadlines
Research Assistant (2001-2006)
•Assisted in the development of a CD-based biochemical micro-detection system.
•Utilized a hydro-gel for the localization and immobilization of molecular compounds.
•Electrically and optically monitored and analyzed biological and molecular activity.
Education
Southern University and Agricultural and Mechanical College at Baton Rouge
Master of Engineering (MEng)
Mechanical Engineering
Louisiana State University
Doctor of Philosophy (PhD)
Mechanical Engineering
Louisiana State University
Research Associate
Research Associate 3 - Microlithography Process and Instrumentation Engineer (2007-2010) I served two roles, (1) as a clean room manager, and (2) as a process engineer. As a manager I: •Managed a class 100 clean room facility •Provided micro-fabrication customer service and research projects to ensure that project timelines are met, deliverables are produced, and that projects stay within the budgetary and other guidelines •Was immediately responsible for over 20 microfabrication processing equipment and for the procurement and installment of new equipment •Instructed and trained faculty, staff, and over 40 students/year on lithography processes and equipment •Conducted studies to improve equipment operation and expand on equipment/process capabilities Some of my duties as a process engineer included: •Provided microfabrication services including LIGA, UV and X-ray lithography, mask fabrication, thin film depositions and surface modification, along with metrology. •Supported research in the area of nanolithography and enhanced etching procedures Research Associate 2 (2006-2007) •Provided microfabrication services including LIGA, UV and X-ray lithography, mask fabrication, thin film depositions and surface modification •Supported research in the area of nanolithography and enhanced etching procedures •Independently supervised two Research Experience for Undergraduate (REU) students with successful outcomes •Worked flexible hours to meet customer demands and deadlines Research Assistant (2001-2006) •Assisted in the development of a CD-based biochemical micro-detection system. •Utilized a hydro-gel for the localization and immobilization of molecular compounds. •Electrically and optically monitored and analyzed biological and molecular activity.
Publications
Visual Detection of Cysteine and Homocysteine
Journal of the American Chemical Society
Visual Detection of Cysteine and Homocysteine
Journal of the American Chemical Society
High Functionality of a Polymer Nanocomposite Material for MEMS Applications
Journal of Microsystems Technologies
Visual Detection of Cysteine and Homocysteine
Journal of the American Chemical Society
High Functionality of a Polymer Nanocomposite Material for MEMS Applications
Journal of Microsystems Technologies
Macrocycle-Derived Functional Xanthenes and Progress Towards Concurrent Detection of Glucose and Fructose
Journal of Fluorescence
Visual Detection of Cysteine and Homocysteine
Journal of the American Chemical Society
High Functionality of a Polymer Nanocomposite Material for MEMS Applications
Journal of Microsystems Technologies
Macrocycle-Derived Functional Xanthenes and Progress Towards Concurrent Detection of Glucose and Fructose
Journal of Fluorescence
Hierarchical Fabrication of TiO2 Nanotubes on 3-D Microstructures for Enhanced Dye-Sensitized Solar Cell Photoanode for Seamless Microsystems Integration
Journal of Microelectronic Engineering
Visual Detection of Cysteine and Homocysteine
Journal of the American Chemical Society
High Functionality of a Polymer Nanocomposite Material for MEMS Applications
Journal of Microsystems Technologies
Macrocycle-Derived Functional Xanthenes and Progress Towards Concurrent Detection of Glucose and Fructose
Journal of Fluorescence
Hierarchical Fabrication of TiO2 Nanotubes on 3-D Microstructures for Enhanced Dye-Sensitized Solar Cell Photoanode for Seamless Microsystems Integration
Journal of Microelectronic Engineering
